Biami and Dinnawhan

20131024_Biami_The_Creation_Story_008

(Nakiya Smith as Dinnawhan and Maitland Schnaars as Biami. Photo credit: Angie To)

For the Wiradjuri Echoes production Biami last year (see previous posts) I also made a mask and costume elements for Biami, and an emu puppet. In the creation story, Biami the creator spirit ‘created the emu Dinnawhan, the female emu, whose spirit he used to create the Wiradjuri people; who now believe they are of the egg of Biami and the female spirit’.

With a headdress (painted up by Duncan Smith) representing the five elements of the sky that he embodies – wind, lightning, thunder, rain and fog – and long soft brushing fingers, Biami’s presence was awesome!

20131024_Biami_The_Creation_Story_002

(Photo credits: Dylan Kovacevic)

20131024_Biami_The_Creation_Story_003

The Rainbow Serpent puppet for Biami

1dbd9bea86d2178c34812a0adb11d1b2

(Duncan Smith, artistic director of the Wiradjuri Echos, with Biami‘s Rainbow Serpent. Photo credit: Angie To)

I  recorded some of the build for Biami, the creation story of the Wiradjuri people, this time last year, (see previous posts) but didn’t get to blog about the Rainbow Serpent until now.

The serpent was about 4 metres long, and operated with rods by four to five people. After worrying about how I could make it twist and turn enough to be truly serpentine if it was designed to have solid body, I had what I think of my ‘warhorse’ moment of inspiration (!), and decided to make it impressionistic, with a skeleton outline instead. So it was made with coiled flexible foam backing rod, and  two midline connecting lines of the same material.

IMG_9710

Then I wrapped coloured cloth around the outlines. The design was effective and light, and enabled the serpent to snake and dive sinuously over the audience, carving out the Australian landscape according to the creation story.

IMG_9711

IMG_9713

Light-up emu egg prop

20131013-204853.jpg

This is the finished emu egg prop made for BiamiThe story recounts how Biami ‘created the emu Dinnawhan, the female emu, whose spirit he used to create the Wiradjuri people; who now believe they are of the egg of Biami and the female spirit’. This is symbolised by the shadow of a baby in the coolamon within.

The egg is made from Plastimake, small pellets of plastic which soften when heated and can then by modeled. I this kind of plastic at Philip Millar’s puppet doctor session at the puppetry conference in Melbourne last year, and have been itching to have a good reason to use it! Peter, who I contacted at Plastimake, was very helpful, and it turned out to be a great material for this project.

I found it quite tricky to think through the various steps in how to make this, as it had to light up from inside but be self-contained, and you have to be able to access the batteries so they can be changed.

I started by making a polystyrene egg about 20 cm long as a former. Here it is with Special Tool A, a bit of plywood with some blunt sandpaper gaffered onto it, which happens to be ideal for smoothing  polystyrene once you have carved to roughly the right shape. Then I cut the egg in half lengthwise and put a bit of polypropylene in between so that I could later split the egg in half easily, and also cut away a small section at each end so that the ends would end up thick enough to hold screws to keep the two halves together.

20131013-204642.jpg

I used small quantities of Plastimake, heated in boiling water. The pellets turn transparent when they are hot enough to fuse, and then you can fish them out with a spoon and mold them to shape. I found that squishing them together a bit with the spoon while they were still in the water was a good idea too. (The little bag of black pellets are colouring pellets of Plastimake which I didn’t end up needing).

20131013-204711.jpg

This photo shows the egg completely covered with plastic, in various stages of setting. The opaque areas of white at the large end are set, but in other places where it is still warm you can see right through to the gladwrapped polystyrene inside. Once the egg was covered roughly, I spent quite a bit of time heating it with a hairdryer and then smoothing it out. One of the great things about Plastimake is that it can be reheated and reused, as well as added to, drilled and cut.

20131013-204738.jpg

The egg has a flattened part for it to rest on so it doesn’t roll around, and into that I set some polypropylene sheeting with the black contact cut-out of the the baby in a coolamon. In the other half is an led light unit from the dollar shop, with it’s switch button rewired to fit into the right position poking through to the outside of the egg. I also replaced the batteries that came with the light with button batteries instead as it seemed neater, hacking a tealight battery holder so that it held two batteries rather than one. (Thanks Zaiga!)

20131013-204803.jpg

Once the egg itself was made and joined up I paper mached the outside with white tissue paper because although paint takes well to Plastimake it can rub off fairly easily with wear. The speckled finish is spray paint and a little green acrylic paint.

20131013-204831.jpg

Grey felt

20131011-223051.jpg

I couldn’t find any fur fabric that was right, so opted for felt for covering the kangaroo mask. I was actually happy about that, (although it still leaves the question of what fabric to use for a tail), because I loved the masks using this technique that I made some years ago. I built a section into the inside of the mask that will fit the wearer’s face comfortably and firmly. There’s still quite a bit of detailing to be done on the ears, eyes and mouth.

While the mask was drying I went back to  making an emu egg for the same show, Biami. I’d already made a polystyrene form for it, but had set it aside while I considered how to make it light up inside. Today I finally covered the egg in Plastimake. I’ll have some photos of the egg later as it progresses.

And now a kangaroo mask

20131010-214839.jpg

Today I’ve been making a kangaroo mask. This is for the Biami production I blogged about yesterday. I decided to use paper mâché even though it’s a little time consuming. For something fairly small like this it’s fine, and I am pretty quick. I like doing paper mâché very much and find it meditative. I’m not sure on the final finish yet – fur or felt?

20131010-214613.jpg

Goanna puppet

20131009-203100.jpg

I’ve been making some puppets for Biami, the creation story of the Wiradjuri people, by Duncan Smith and Maitland Schnaars, which will be performed  for the Kids, Creatures and 100 Harlequins – Centenary Children’s Week Celebration on 25 & 26 October in Glebe Park. (It’s part of the Centenary of Canberra project.)  Today I finished the goanna!

20131009-204849.jpg

20131009-205041.jpg